Turbo gen 1 street bike

[Thedeej97]

[Thedeej97]

[Thedeej97]

[Thedeej97]

[Thedeej97]

[Thedeej97]

[Thedeej97]

[Thedeej97]

Still pics wouldn’t hurt unless secret going on. Some have been thru every combo.

Lol no secrets

[Thedeej97]

[Thedeej97]

[Thedeej97]

Obviously you can see a stud needs replaced here

[Thedeej97]

[Thedeej97]

Those are all the pics I got. Maybe y’all see something I don’t see. I got this bike stupid cheap and then rode it to the gym and a lady knocked it over so her insurance gave me 8400 with out totaling it! Lol I only paid 4700 for it.

[JeffSyh]

@Thedeej97

That's a shimmed fmu I'd change it to the updated shimless from rcc.

FMU Rising Rate Fuel Pressure Regulator - RCC Turbos

rccturbos.com

Also that exhaust bolt needs replacing with new gaskets and you have multiple oil leaks that need addressing.

Are those barricaded fuel lines?

You have a good bit of work ahead of you!

[Thedeej97]

I think the leak is from the oil pan gasket

[202mphbusa]

Nothing is poop quality from what I can see
Not top of the line either

If you like the bike, Fix the oil pan leak, take her to the dyno to double check A/F or have someone weld a bung on and get a O2 sensor to check it
Clean her up and enjoy, you can always make changes later
At some point a PCV-TPI with big injectors and ECU reflash
the FMU could be removed and the multi boost level fueling cleaned up

[over200]

Looks like a velocity stage 1 kit

[greg3852]

Those are all the pics I got. Maybe y’all see something I don’t see. I got this bike stupid cheap and then rode it to the gym and a lady knocked it over so her insurance gave me 8400 with out totaling it! Lol I only paid 4700 for it.

Personally I’d bail from that. You will spend a ton of money getting that thing up to snuff. Sell it for some more money and buy a stock one.

[michael parris heuberger]

Personally I’d bail from that. You will spend a ton of money getting that thing up to snuff. Sell it for some more money and buy a stock one.

Hi. He is close to some good builders turners let them take a look see what they think and see what it would cost to make into what he wants.

[greg3852]

Hi. He is close to some good builders turners let them take a look see what they think and see what it would cost to make into what he wants.

Very true. I just don’t want to see him think he is going to get a solid turbo bike without spending a lot a coin. Just want him to be prepared.