Gen 2, street bike only, heads cam package next or?

[mjl3truck]

On that comparison what gears are you running NA?
What all is done to your gen 2?
I wonder on that mph with the turbo busa, how his gearing is? Pretty tall i bet

I'm running 18x44 with a 190/55 BT003 rear for gearing, my goal is to hit the traps at 11,200.
Woessner 1340 pistons, big ass cams, head ported by I don't know who, bought it used from Scott Horner, stock valves, studs up top and below, Ti-Force pipe, Woolich tuned by Nels at 2 wheel Dyno Works on MR12, stock body work, lots of little things. When you run a N/A bike you have to sweat the details (gearing, fuel, friction, aero) to get any top speed.

[ali123]

Hi. Turbo bikes can run mid 6,5 sec in the 1/4 mi and reach 220 MPH. It is ALL in the gearing to be sure.

there aren't toooo many 6.5 seconds 220 mph bikes out there.. that is an accomplishment and a team effort and a LOT of seat time and combinations.....

[ali123]

Yeah us N/A guys need to cane 'em pretty hard in the first 1/2 to get any speed out the back. Shane Stubbs on his turbo naked ran 200 in the 1/2 then 248 at the mile so that is close to +50 on a unfaired bike.
For his type of roll on racing I think a hairdryer is hard to beat. If he wanted to go stoplight to stoplight I'd go big N/A with a little nitrous.

to get a turbo bike to go stoplight to stoplight.. its just more electronics and chassis work and a boost controller.. ya know.. the "little things"

[RedBull]

Hi .

Turbo bikes can run
mid 6.4 seconds in
the 1/4 mile and
reach 220+ MPH .

It is ALL in
the gearing
to be sure .