"S" Removal from tank

big ed

Donating Member
Joined
Oct 7, 2006
Messages
371
Reaction score
1
I set mine outside in the sun for about an hour & they peeled right off by hand.(remember there is alot of clear coat on the tank for protection & its just a cheap vinyl sticker)then I cleaned up the area with honda polish & presto!they where never there.

Rainer3012

Registered
Joined
Jul 18, 2007
Messages
322
Reaction score
1
(qwknuf6 @ Aug. 23 2007,19:53) Set the bike out and the sun and let it warm up good ,or use a hair dryer and warm the S, grab an edge of the S and slowly pull off , there may be some adhesive left on the tank ,just spray a little WD-40 and wipe with a clean mirco fiber towel , then wax . no paint should come off .
Take a look
+1 heat gun would work too

GMbusa

Orange is the fastest
Registered
Joined
Mar 20, 2004
Messages
8,099
Reaction score
1,339
FYI, the "S" is flexible, so it will come off easy after sitting in the sun.
Back
Top