I installed brock's clutch mod as well as his cushion mod and have run into a problem ... actually 2.
1 - The oil light stays on even though the window shows the proper oil level.
2- The clutch won't engage. I put it in 1st and gave it a slight rev and the bike acted as if it was still in neutral.
Right after I installed it the bike went into gear and moved as if it was working properly. But then I noticed the oil light was on. I then checked the window and saw it was low. There actually was NO oil in the window. I shut the bike off and went and purchased a quart of oil. When I got home I checked the window again and saw it was now between the L and F lines. Yet still the oil light remains on. This time when I started it though the bike didn't move when placed into gear.
Also, I installed the clutch mod with the stock springs and no spacers. I thought I'd see how that felt before I used the spacers or stiffer springs.
What did I do wrong?
1 - The oil light stays on even though the window shows the proper oil level.
2- The clutch won't engage. I put it in 1st and gave it a slight rev and the bike acted as if it was still in neutral.
Right after I installed it the bike went into gear and moved as if it was working properly. But then I noticed the oil light was on. I then checked the window and saw it was low. There actually was NO oil in the window. I shut the bike off and went and purchased a quart of oil. When I got home I checked the window again and saw it was now between the L and F lines. Yet still the oil light remains on. This time when I started it though the bike didn't move when placed into gear.
Also, I installed the clutch mod with the stock springs and no spacers. I thought I'd see how that felt before I used the spacers or stiffer springs.
What did I do wrong?