Hump Mod Kit

[little]

I've done a search but did not come up with anything recent.

Who here is selling hump mod (storage) kits now?

 

[rockadaous]

the 1/4 turn fastners?

 

[little]

^ Yep, or if there is another one that is "better". Just kept looking and found the "humpmod.com" kit.

Any suggestions? Would prefer to buy from someone on the board.

 

[spkerhed]

try this https://www.hayabusa.org/cgi-bin/busa/ikonboard.cgi?act=ST;f=11;t=66316

 

[spkerhed]

(rockadaous @ Mar. 24 2007,19:53)

yep the same but my linky was broke

 

[little]

Thanks, Just ordered a set from Humpmod.com

 

[dmrowe]

IG does a good job of putting a kit together, as I noted in my post the only thing I see missing is the 'wear' washer that goes under the 1/4 turn fastener. The hump mod winds up being especially adventageous since my boot is getting filled with electronics.

 

[hayabusa99b/w]

 

[Spudley]

OKAY, here's the lowdown....

Aircraft Specialty and Spruce Co. (225 Airport Circle, Corona, Cal, 92880) # 951-372-9555

Southco Wing Fastener p/n 82-12-300-16

Southco Retainer p/n 82-32-101-20

Southco Wear Washer p/n 82-46-101-39

Southco DAC RCPTL p/n 82-47-113-150

Buy four of each, and you have your hump mod kit. Costs all of about $8.00. Shipped TYD for about $10.00 total. You can also order them online at their website.

Someone should pin these up for future use. Thank Toykraz for the info.

He gave me a set, I ordered a set for Gofaster, and so-on, and so-on, and so-on !!!!!

Peace.

 

[dmrowe]

(Spudley @ Mar. 25 2007,03:18) OKAY, here's the lowdown....

Aircraft Specialty and Spruce Co. (225 Airport Circle, Corona, Cal, 92880)  # 951-372-9555

Southco Wing Fastener p/n 82-12-300-16

Southco Retainer p/n 82-32-101-20

Southco Wear Washer p/n 82-46-101-39

Southco DAC RCPTL p/n 82-47-113-150

Buy four of each, and you have your hump mod kit.  Costs all of about $8.00.  Shipped TYD for about $10.00 total.  You can also order them online at their website.  

Someone should pin these up for future use.  Thank Toykraz for the info.  

He gave me a set, I ordered a set for Gofaster, and so-on, and so-on, and so-on !!!!!

Peace.

LOL!

 

[OZZY]

(Spudley @ Mar. 25 2007,06:18) OKAY, here's the lowdown....

Aircraft Specialty and Spruce Co. (225 Airport Circle, Corona, Cal, 92880)  # 951-372-9555

Southco Wing Fastener p/n 82-12-300-16

Southco Retainer p/n 82-32-101-20

Southco Wear Washer p/n 82-46-101-39

Southco DAC RCPTL p/n 82-47-113-150

Buy four of each, and you have your hump mod kit.  Costs all of about $8.00.  Shipped TYD for about $10.00 total.  You can also order them online at their website.  

Someone should pin these up for future use.  Thank Toykraz for the info.  

He gave me a set, I ordered a set for Gofaster, and so-on, and so-on, and so-on !!!!!

Peace.

USED THE SAME PARTS. WAS LESS THAN 10 BUCKS SHIPPED TO MY DOOR AND IT WORKS GREAT!!!

 

[Pipefighter248]

(ozzy04 @ Mar. 25 2007,19:55)

(Spudley @ Mar. 25 2007,06:18) OKAY, here's the lowdown....

Aircraft Specialty and Spruce Co. (225 Airport Circle, Corona, Cal, 92880) # 951-372-9555

Southco Wing Fastener p/n 82-12-300-16

Southco Retainer p/n 82-32-101-20

Southco Wear Washer p/n 82-46-101-39

Southco DAC RCPTL p/n 82-47-113-150

Buy four of each, and you have your hump mod kit. Costs all of about $8.00. Shipped TYD for about $10.00 total. You can also order them online at their website.

Someone should pin these up for future use. Thank Toykraz for the info.

He gave me a set, I ordered a set for Gofaster, and so-on, and so-on, and so-on !!!!!

Peace.

USED THE SAME PARTS. WAS LESS THAN 10 BUCKS SHIPPED TO MY DOOR AND IT WORKS GREAT!!!

+1

 

[dmrowe]

This is why Iceman posted ages ago about the hump mod and why I posted with part numbers, pictures and Southco's contact information. This is so simple even a CAVEMAN can do it!

 

[spkerhed]

(Spudley @ Mar. 25 2007,03:18) Someone should pin these up for future use.  Thank Toykraz for the info.  

He gave me a set, I ordered a set for Gofaster, and so-on, and so-on, and so-on !!!!!

Peace.

Actually you should be thanking dmrowe he did ALL the research for this kit and was gracious enough to share with the rest of us org brothers

thank you sir the kit works flawlessly