I Need Lowering Pegs

[MeteorX]

Hi guys,

This is my first time posting here.

I was hoping to find out if you guys know of any peg lowering brackets and mounts that would fit the new Gen 3?

I’m hoping to drop the pegs about 1 or 2 inches to make it a bit easier on my knees.

So far I haven’t found any luck finding anything specifically for the Gen 3, but I’m unsure if Gen 2 mounts would fit on this new model.

[Bumblebee]

Hi guys,

This is my first time posting here.

I was hoping to find out if you guys know of any peg lowering brackets and mounts that would fit the new Gen 3?

I’m hoping to drop the pegs about 1 or 2 inches to make it a bit easier on my knees.

So far I haven’t found any luck finding anything specifically for the Gen 3, but I’m unsure if Gen 2 mounts would fit on this new model.

Welcome,

I gather lowering pegs from other generations would work?? Perhaps measure the width and length of your foot peg mounts and we can compare with our bikes to be sure.

If so, Amazon has them, there are a few different ones, Knight's design are expensive but nice, there are Chinesium ones as well which are less expensive and decent. You could go into Amazon or ebay and have a browse.

[murphc13]

Welcome,

I gather lowering pegs from other generations would work?? Perhaps measure the width and length of your foot peg mounts and we can compare with our bikes to be sure.

If so, Amazon has them, there are a few different ones, Knight's design are expensive but nice, there are Chinesium ones as well which are less expensive and decent. You could go into Amazon or ebay and have a browse.

I need a set for my 14.Where are these Knight ones at?

[Bumblebee]

I need a set for my 14.Where are these Knight ones at?

Amazon has them, one is uncoated and the other is black iodized

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, silver anodized, Foot Pegs - Amazon Canada

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, silver anodized in Foot Pegs.

www.amazon.ca

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, black anodized, Foot Pegs - Amazon Canada

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, black anodized in Foot Pegs.

www.amazon.ca

[MeteorX]

Welcome,

I gather lowering pegs from other generations would work?? Perhaps measure the width and length of your foot peg mounts and we can compare with our bikes to be sure.

If so, Amazon has them, there are a few different ones, Knight's design are expensive but nice, there are Chinesium ones as well which are less expensive and decent. You could go into Amazon or ebay and have a browse.

Thanks for the reply!

I'll measure them when I get a chance in the next day or two.

I had found those Knight's Design black anodized ones, but was told by someone that they wouldn't fit.

I guess I can't just take people's word on it and should just check myself to be sure.

As far as measurements go, I'm assuming I would need the width of the mount, and the diameter of the hole where the pin holds?

[groran1000]

M-Grip Billet 40mm Front Riser Footpegs Fit Suzuki GSX 1300R Hayabusa 08-16 | eBay

CNC Billet M-Grip 40mm Adjustable Front Rider Foot Pegs - Easy Installation - Reasonable Price - Longer than the original footpegs - Concise Design with High Quality - CNC Machined made from T6061-T6 Aluminum - Turns your stock footrests into High Grade CNC Billet Footpegs - Not including "OEM...

www.ebay.com

it fits all 3 gen's and I've been using them for years.

[murphc13]

Amazon has them, one is uncoated and the other is black iodized

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, silver anodized, Foot Pegs - Amazon Canada

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, silver anodized in Foot Pegs.

www.amazon.ca

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, black anodized, Foot Pegs - Amazon Canada

Knight Design 1 inch Lowered Front Foot Pegs for Suzuki Hayabusa Models, Sidetrax tread, black anodized in Foot Pegs.

www.amazon.ca

Expensive.Overpriced imo.Thanks for the links.

[murphc13]

M-Grip Billet 40mm Front Riser Footpegs Fit Suzuki GSX 1300R Hayabusa 08-16 | eBay

CNC Billet M-Grip 40mm Adjustable Front Rider Foot Pegs - Easy Installation - Reasonable Price - Longer than the original footpegs - Concise Design with High Quality - CNC Machined made from T6061-T6 Aluminum - Turns your stock footrests into High Grade CNC Billet Footpegs - Not including "OEM...

www.ebay.com

it fits all 3 gen's and I've been using them for years.

I might try these.Cheers.

[Bumblebee]

M-Grip Billet 40mm Front Riser Footpegs Fit Suzuki GSX 1300R Hayabusa 08-16 | eBay

CNC Billet M-Grip 40mm Adjustable Front Rider Foot Pegs - Easy Installation - Reasonable Price - Longer than the original footpegs - Concise Design with High Quality - CNC Machined made from T6061-T6 Aluminum - Turns your stock footrests into High Grade CNC Billet Footpegs - Not including "OEM...

www.ebay.com

it fits all 3 gen's and I've been using them for years.

I gave the same ones, they work great although I've just noticed they are wearing into the instep of my boots...

[Bumblebee]

Thanks for the reply!

I'll measure them when I get a chance in the next day or two.

I had found those Knight's Design black anodized ones, but was told by someone that they wouldn't fit.

I guess I can't just take people's word on it and should just check myself to be sure.

As far as measurements go, I'm assuming I would need the width of the mount, and the diameter of the hole where the pin holds?

For the measurements, I'd say so....

As per the link provided by @groran1000 , I use the Chinesium drop pegs too and they work fine as well..

I notice the tread on the Knight's Design to be pretty aggressive and kind of thought my boot might get caught on it when coming to a stop...

[MeteorX]

M-Grip Billet 40mm Front Riser Footpegs Fit Suzuki GSX 1300R Hayabusa 08-16 | eBay

CNC Billet M-Grip 40mm Adjustable Front Rider Foot Pegs - Easy Installation - Reasonable Price - Longer than the original footpegs - Concise Design with High Quality - CNC Machined made from T6061-T6 Aluminum - Turns your stock footrests into High Grade CNC Billet Footpegs - Not including "OEM...

www.ebay.com

it fits all 3 gen's and I've been using them for years.

Oh wow! I'm really glad I decided to post on here. I was kind of skeptical as to how active the community would be and how receptive they are to new Busa riders.

Coming from the Concours 14 forums and Facebook groups, bike forums had left a rather sour taste in my mouth. Those older dudes are really not the most inclusive bunch.

I'm going to give those M-Grip 40mm drop pegs a try.

Would I have to do anything to adjust the shift lever or rear brake or are you still able to reach the foot controls fine even after the 1.5" displacement from the new peg set?

[sixpack577]

Oh wow! I'm really glad I decided to post on here. I was kind of skeptical as to how active the community would be and how receptive they are to new Busa riders.

Coming from the Concours 14 forums and Facebook groups, bike forums had left a rather sour taste in my mouth. Those older dudes are really not the most inclusive bunch.

I'm going to give those M-Grip 40mm drop pegs a try.

Would I have to do anything to adjust the shift lever or rear brake or are you still able to reach the foot controls fine even after the 1.5" displacement from the new peg set?

yeah...you really have to watch out for those older dudes

[groran1000]

Oh wow! I'm really glad I decided to post on here. I was kind of skeptical as to how active the community would be and how receptive they are to new Busa riders.

Coming from the Concours 14 forums and Facebook groups, bike forums had left a rather sour taste in my mouth. Those older dudes are really not the most inclusive bunch.

I'm going to give those M-Grip 40mm drop pegs a try.

Would I have to do anything to adjust the shift lever or rear brake or are you still able to reach the foot controls fine even after the 1.5" displacement from the new peg set?

No, I didn't have to adjust any control pedals at all. You get used to the different angles after the lower peg install. Watch closely how the old peg comes off so you can install the lower peg. Make sure of the spring placement.

[Bumblebee]

Oh wow! I'm really glad I decided to post on here. I was kind of skeptical as to how active the community would be and how receptive they are to new Busa riders.

Coming from the Concours 14 forums and Facebook groups, bike forums had left a rather sour taste in my mouth. Those older dudes are really not the most inclusive bunch.

I'm going to give those M-Grip 40mm drop pegs a try.

Would I have to do anything to adjust the shift lever or rear brake or are you still able to reach the foot controls fine even after the 1.5" displacement from the new peg set?

I had to adjust mine slightly but it was a painless task...

We like new Busa riders, the more the merrier....of course we like all riders...there are people who post on here who sold their bikes long ago but are still active here......it's that kind of place....

[SidneyCarton]

I bought the same from ebay. They fit and work fine. A nice improvement.

[ottafish]

I have the Buel pegs, but the same as above from ebay I got for the GF on the back when we 2up. Lower and slightly forward gives her hips and knees a better position.
As I said to her at the time, it's only a small change but it's amazing what an extra inch will do to make you feel better.

[voodoodoo]

Buell N0006.1AD works fine.
Needs a little grinding on the sides and a bushing for the central pin.

[MeteorX]

I have the Buel pegs, but the same as above from ebay I got for the GF on the back when we 2up. Lower and slightly forward gives her hips and knees a better position.
As I said to her at the time, it's only a small change but it's amazing what an extra inch will do to make you feel better.

Yeah, I was trying to explain that to my gf as well XD. *no sexual innuendo intended*

If these MFactory ones work out, I'm going to order her a set as well. I'm 6'2 and keep getting pain in my left knee after 30+ minutes on the bike.

I'm excited to try and see if this fixes the issue with the bike ergonomics for me.

I thought I'd need bar risers too, but the top half of my body is surprisingly at home with the way the bars are currently positioned. I've really grown to like it.

[MeteorX]

I bought the same from ebay. They fit and work fine. A nice improvement.

Just ordered mine.

[SidneyCarton]

Here’s one side…