okay stock map 1&2 are what came loaded with the bazazz unit, i have the bazazz unit with the Z-AFM kit and the map selection switch. the Z-Fi Map 1&2 is what i got from the Z-AFM
If you are road or track tuning use gear one and two only, lots of load and you need load for proper tuning. Hit every thottle postion and rpm with each gear (1-2) at least three times after the bike is warmed up for 10 minutes. Save the changes, then switch into a third gear and see if the ZFAM wants to go up or down with corrections, then go the the gear position selector and use the average number for that gear, repeat for the remain gears.Yes, this is what i did , i cleared everthing thursday night and started the mapper, friday morning after work i was out burning the highways up,saved the map and took her out today
Come on up we have pow-wows all the time where we just sit and brainstorm on a new angle.THANKS ALOT GREG FOR YOUR TIME AND INPUT, I WOULD STILL LIKE TO COME TO THE SHOP