Footpeg lowering (front)

Rojo

Registered
Joined
Oct 11, 2023
Messages
3,135
Reaction score
4,395
You Got Me Stumptown GIF by ABC Network

Sinister#4

Registered
Joined
Sep 11, 2023
Messages
91
Reaction score
173
Anyone have any of the buell pegs ? N0006.1AD silver only or a link to the "joe" fellow who does (did) them ?

Sinister#4

Registered
Joined
Sep 11, 2023
Messages
91
Reaction score
173
Heres the cut needed to allow the shifter side peg to clear using the knight design gen 2 pegs. The pegs actually go on with NO cut but it will NOT fold up with out hitting the shifter pivot, so a small cut is needed

P1010153.JPG


P1010154.JPG

Rojo

Registered
Joined
Oct 11, 2023
Messages
3,135
Reaction score
4,395
Fight Fire GIF by PLAYMOBIL

Monkydad

Registered
Joined
Nov 29, 2025
Messages
50
Reaction score
125
I bought the M factory 40mm (1-1/2) for gen 2 and they fit my gen 3 right out of the box and I have stock exhaust, the shifter and brake are easy to adjust. I think one lever took two 10mm wrenches and the other lever took one 10mm and an 8mm wrench. My shifter up shifts fine but I have to raise my foot a little for down shifting, I can’t adjust down anymore or it will hit the exhaust. The brake lever is adjusted perfect.
Hi, do you happen to have part numbers, or other more identifying nomenclature?

Are they Motion Factory Racing?

Thanks!!
Back
Top