6lbs just not enough

[busakiller]

You get the bike tuned yet?

[Cncbusa]

You get the bike tuned yet?

Just "street tune". Waiting till i turn the boost up to dyno tune it. I just data logged and adjusted the previous map that i had. It runs really well. There is a hiccup in it when i full throttle at low speed that i cant figure. It hesitates and then goes balls out. Im not sure if its a timing thing? Sunday im meeting my guy at the track and hes going through the ecu to hopefully get that cleaned up. I need to order the plumbing for the ams, injectors, then hit the dyno....

[Cncbusa]

Came out alright.

[Cncbusa]

Well i gave in. Still currently have the fmu setup on 15psi. But i have the fueltech at home waiting to go on. Just havent decided on the wiring part. (To do my own or pay... alot) and with a baby on the way im reconcidering the whole thing.

[Quiksilver]

I

Well i gave in. Still currently have the fmu setup on 15psi. But i have the fueltech at home waiting to go on. Just havent decided on the wiring part. (To do my own or pay... alot) and with a baby on the way im reconcidering the whole thing.

View attachment 1613154

Think you should thrown in the towel, I can pm you my address so you can send the ecu stuff my way!

[Mr Brown]

Well i gave in. Still currently have the fmu setup on 15psi. But i have the fueltech at home waiting to go on. Just havent decided on the wiring part. (To do my own or pay... alot) and with a baby on the way im reconcidering the whole thing.

View attachment 1613154

Congratulations on the news!

[Boosted Cycle Perf]

Well i gave in. Still currently have the fmu setup on 15psi. But i have the fueltech at home waiting to go on. Just havent decided on the wiring part. (To do my own or pay... alot) and with a baby on the way im reconcidering the whole thing.

View attachment 1613154

I was just getting ready to order one of these...

orlando isn’t too far away from Houston...

[Boosted Cycle Perf]

Wiring? What’s that?

[ItsDooomz]

Let me know if you want to get rid of that Fueltech stuff. I live in Central Florida and I'll be buying an FT550 fairly soon.

[Cncbusa]

Morning fab.

[Cncbusa]

Installed

[Cncbusa]

Installed

[Cncbusa]

Pregnant wife, now a broken arm and shoulder blade... might be rip busa. Someone pulled out in front of me three houses down. I locked up the front brake and down i went. Deffinitly rider error along with driver stupidity

[Tenderfoot]

Pregnant wife, now a broken arm and shoulder blade... might be rip busa. Someone pulled out in front of me three houses down. I locked up the front brake and down i went. Deffinitly rider error along with driver stupidity

View attachment 1613459

Man, hate to hear that. I've been following your build and hope you have a quick recovery.

[Mr Brown]

Damn....hate to hear that.

[Bumblebee]

That was a hard fall, did your helmet come off?-looks like you got a whack in the head too...

[Cncbusa]

blew a gasket the same day i crashed. Pushing coolant, so i made some new spanner socket to pull the motor. Guess 18psi was too much? I checked the torque on the head bolts, feels like its pulled the studs from the block. Guess im gonna go from the 10mm to 1/2. Although when i called APE who ever i spoke to said just put in some helicoils and run the 10mm.

[Cncbusa]

(I previously cut up some sockets to make the spanner and the teeth broke) so these are from scratch and will be heat treated.

[Cncbusa]

That was a hard fall, did your helmet come off?-looks like you got a whack in the head too...

No helmet. I was just riding to the stop sign and back or so i thought.

[Mr Brown]

No helmet. I was just riding to the stop sign and back or so i thought.

A lot of us have thought that too.