I'm about to remove the nose fairing and was hoping someone could help me out. Right now I have taken off the following:
1. All inner panels
2. Both side panels
3. All panels under the front tire (still need to remove panel right above the tire)
4. Both mirrors
5. Two screws that connect the nose to the ram intakes
6. Gauges
My understanding is that I just need to do the following:
1. Remove the remaining panel from #3
2. Stand in front of the bike and gently pull the sides over the mirror mounts.
3. Then gently pull the nose off.
Is this correct? Do I need to unplug any electrical connections such as the signals and headlight? I'm not sure if these come off attached to the nose or if they remain on the bike. Any help would be greatly appreciated.
Thanks,
JPunisher
1. All inner panels
2. Both side panels
3. All panels under the front tire (still need to remove panel right above the tire)
4. Both mirrors
5. Two screws that connect the nose to the ram intakes
6. Gauges
My understanding is that I just need to do the following:
1. Remove the remaining panel from #3
2. Stand in front of the bike and gently pull the sides over the mirror mounts.
3. Then gently pull the nose off.
Is this correct? Do I need to unplug any electrical connections such as the signals and headlight? I'm not sure if these come off attached to the nose or if they remain on the bike. Any help would be greatly appreciated.
Thanks,
JPunisher