How to lower front of bike

[Beaubear12]

Hello I know this has been covered but I'm trying to lower my bike like the one pictured. But I've always seen that people said that the levers would hit. I've installed shorty levers. Is there anyway around that. Don't want to waste money. Thanks

 

[Mathewrussell52]

Levers are not a issue. But that bike is low really low. I would think you have to shorten the front forks internally. You could get a new triple tree so your forks can slide up and strap it. Here is mine

 

[Beaubear12]

Levers are not a issue. But that bike is low really low. I would think you have to shorten the front forks internally. You could get a new triple tree so your forks can slide up and strap it. Here is mine

View attachment 1620138

View attachment 1620141

Upper or lower triple?

 

[michael parris heuberger]

Levers are not a issue. But that bike is low really low. I would think you have to shorten the front forks internally. You could get a new triple tree so your forks can slide up and strap it. Here is mine

View attachment 1620138

View attachment 1620141

Hi. Trac Dynamics makes a 2 inch and 3 inch lowering kits or DME makes a triple tree that you can slide your forks up, and they can cut the forks too

 

[Mathewrussell52]

Upper or lower triple?

Upper like in my pic

 

[Beaubear12]

Hi. Trac Dynamics makes a 2 inch and 3 inch lowering kits or DME makes a triple tree that you can slide your forks up, and they can cut the forks too

Good call on those slammerz from Trac dynamics. Ordering a set tomorrow

 

[michael parris heuberger]

Good call on those slammerz from Trac dynamics. Ordering a set tomorrow

HI. I have them on my bike. I also have 1 inch racked custom made triple trees and on the rear I have a 1 inch shorter Penske shock with a titanium spring and lowering links. The frame will be modified with all extra weight removed and short necked for more room far a large turbo. Target weight is 450 LBS . Target HP is 800+.