SUPERLUMINATIONS Has agreed to sponcer a board group buy for anyone that has wanted to switch over from the stock front turn signal bulb to LED's. Switch is plug and play swap. Remove one replace the other. Less wattage and less battery drain, especially for those that have tons of other poser mods like me!.
The bulb consists of 20 super bright surface mounted wide angle oval LED's in tower configuration. LED's are clear that light up white or clear that light up amber. Available in 1156 (STOCK) or 1157 (for those with the daytime running light socket mod). 15 side facing LEDS and 5 forward facing LEDS.
SEE PIC!
The LED units do not have built in load limit equalizers to make them flash normally. HOWEVER
SUPERLUMINATIONS has agreed to nearly throw them in on the purchase being that their pretty much needed.
For those who bought flash controlers for rear leds from leibertek you will remember they were $40.00 + shipping
These will be priced at $6.00 each which isnt too hatefull.
There are two different sizes of equalizers. A 3-Ohm if you have rear led bulbs that flash fast now and add tower led's to the front. You install one on each side of the bike to handle all four.
The second is a 6-Ohm which would be installed across the bulb leads themselves if you were just doing front bulbs.
IF YOU HAVE MY LED TAIL LIGHTS JUST DO THE FRONT!.
The load limit equalizers are quick installs. They come with quick splices that can be used to splice into the wires without cutting them. They pierce thru the insulation of the wires.
The price would be set up as follows: (Which includes the 20% discount).
2x amber or two white tower bulbs $32
2x 6 ohm equalizers $12
$44 + $3 S&H
$47 per set.
If you dont want the eq's just get the bulbs!.
Attached image is the eq's installed. The eq's do get warm so overthem or mount them so they dont touch much plastic. Same as before.
Ref
Ive got mine coming and Ill be posting pics soon. Not sure how long it's going to last but get in if you want in!.
Contact them directly mention the board or me! IF it does well they might become a board sponcer!.
JD
<!--EDIT|ICEMANN
Reason for Edit: None given...|1113281267 -->
The bulb consists of 20 super bright surface mounted wide angle oval LED's in tower configuration. LED's are clear that light up white or clear that light up amber. Available in 1156 (STOCK) or 1157 (for those with the daytime running light socket mod). 15 side facing LEDS and 5 forward facing LEDS.
SEE PIC!
The LED units do not have built in load limit equalizers to make them flash normally. HOWEVER
SUPERLUMINATIONS has agreed to nearly throw them in on the purchase being that their pretty much needed.
For those who bought flash controlers for rear leds from leibertek you will remember they were $40.00 + shipping
These will be priced at $6.00 each which isnt too hatefull.
There are two different sizes of equalizers. A 3-Ohm if you have rear led bulbs that flash fast now and add tower led's to the front. You install one on each side of the bike to handle all four.
The second is a 6-Ohm which would be installed across the bulb leads themselves if you were just doing front bulbs.
IF YOU HAVE MY LED TAIL LIGHTS JUST DO THE FRONT!.
The load limit equalizers are quick installs. They come with quick splices that can be used to splice into the wires without cutting them. They pierce thru the insulation of the wires.
The price would be set up as follows: (Which includes the 20% discount).
2x amber or two white tower bulbs $32
2x 6 ohm equalizers $12
$44 + $3 S&H
$47 per set.
If you dont want the eq's just get the bulbs!.
Attached image is the eq's installed. The eq's do get warm so overthem or mount them so they dont touch much plastic. Same as before.
Ref
Ive got mine coming and Ill be posting pics soon. Not sure how long it's going to last but get in if you want in!.
Contact them directly mention the board or me! IF it does well they might become a board sponcer!.
JD
<!--EDIT|ICEMANN
Reason for Edit: None given...|1113281267 -->