BigBadDodge
Registered
Hey guys new here worked a trade last night for a 06 hayabusa for my pro street car, absolutely in love with the bike only issue is the chain rubs the tire. Old owner put a chain roller on the swingarm on a real flimsy stainless bracket, so i made up a better bracket but its still rubbing and putting quite a bit of pressure against the chain, The lower run of the chain is against the tire is there an easy way to shim out the rear sprocket? It looks like it dives in at the rear tire, the tire is a 240/40/18 shinko advance inflated to 42 psi, adjustment blocks are dead even side to side
Not sure what make the sprocket is
You can see where it dives inward right infront of the tire at the chain roller
In ^^^that pic you can see the upper section of the chain is close but will clear, in this one you can see the chain is rubbing the tire down low
And heres my beauty
Not sure what make the sprocket is
You can see where it dives inward right infront of the tire at the chain roller
In ^^^that pic you can see the upper section of the chain is close but will clear, in this one you can see the chain is rubbing the tire down low
And heres my beauty