Happy Holidays Good People, I recently purchased a chrome clutch cover to enhance the appearance of gen 1 Busa, my question is can the clutch cover gasket be reused? also I just had an oil change about 100 miles ago and added full synthetic oil, I would hate to do another oil change on the bike, once I open the case any idea how much oil I will lose?
Appearance Mod Question-clutch cover
- Thread starter Phillip W
- Start date
c10
Registered
Well you can reuse a clutch cover gasket if it was prepared before it was installed . Drag racer trick chap stick on the engine case side to prevent the paper from sticking / breaking . Kind of like a egg in a frying pan treated , and un treated . Most likely you wont be able to reuse your current gasket .
2nd do the work with bike on its side stand . you will lose little to no oil . To get a little more lean angle pust the bike up on a 8' long 1 x 4 or 1x6 to get more lean on side stand .
You do know your removing a very light Magnesium OEM cover for a Heavy cover correct ?
2nd do the work with bike on its side stand . you will lose little to no oil . To get a little more lean angle pust the bike up on a 8' long 1 x 4 or 1x6 to get more lean on side stand .
You do know your removing a very light Magnesium OEM cover for a Heavy cover correct ?
Similar threads
