So where do I start? Yesterday I rode and everything worked great.....stopped for about an hour, and when I cranked her back up, there was nothing! Everything read ZERO........my headlight worked, the oil light worked, and the back light was on, but all the gauges stayed pegged at zero.
I drove it to work and parked it for 8 hours.......when I started her up again, the speedo and tach moved up to about the 30mph levels and the fuel and temps jumped up to about half, and they've been frozen there ever since. No sweep, no movement whatsoever. The connection seems fine on the back of the cluster and all of the fuses are fine. I would try the speed sensor, but since the other gauges are screwed up also, I'm at a loss.
I have a TRE installed and also a SpeedoHealer, but even when I bypassed them both, no change!
Any ideas?
I drove it to work and parked it for 8 hours.......when I started her up again, the speedo and tach moved up to about the 30mph levels and the fuel and temps jumped up to about half, and they've been frozen there ever since. No sweep, no movement whatsoever. The connection seems fine on the back of the cluster and all of the fuses are fine. I would try the speed sensor, but since the other gauges are screwed up also, I'm at a loss.
I have a TRE installed and also a SpeedoHealer, but even when I bypassed them both, no change!
Any ideas?