2013 busa shutdown when cluch applied to 1st.

[Markous]

I have a two thousand and thirteen hayabusa. It shuts down when you engage 1st gear after 5 minutes of riding. After it cools down, it is fine for a minute of riding. When it is warm and you engage the clutch gear it shuts down immediately. It starts up every time in neutral. It starts up when it is hot you just cannot engage the clutch.

[Markous]

What's the best ecu programming scan tool?

[Hayabusa Wannabe]

BUMP

[Dennis]

Is FI light illuminated?

[sixpack577]

Bad clutch switch, or possibly gear position sensor.

[Busa Quick]

Kickstand switch... You don't need the clutch to put the motorcycle in gear, otherwise you'd have the problem every time you went from second back to first gear.

[LC4CARL]

I have a two thousand and thirteen hayabusa. It shuts down when you engage 1st gear after 5 minutes of riding. After it cools down, it is fine for a minute of riding. When it is warm and you engage the clutch gear it shuts down immediately. It starts up every time in neutral. It starts up when it is hot you just cannot engage the clutch.

My '05 would intermittently turn off, after start up, when moving the shifter from neutral. Maddening. This cured mine:

Side-Stand Sensor Eliminator Connectors – Boost by Smith

Side-stand eliminator fits all Busas and most suzuki's.

boostbysmith.com

Pulling the clutch in did not cause a problem on mine, so you may have a different issue.