To start off, before today, the bike worked perfectly.
I installed this clutch mod today:
Used three of the heavy duty springs and three of the stock springs.
I got everything together and started up the bike.
Put it in 1st gear to take off and when releasing the clutch the bike doesn't move at all.
It's like the bike is in neutral all the time whether it's in gear or not.
I took everything apart and made sure I installed everything correctly.
In order to rule out that the problem was not the clutch mod, I put it back to stock.
No clutch mod and all 6 stock springs.
Same problem, bike doesn't move in gear when releasing the clutch.
Really need some help, it sucks that I can't even ride it now even though I removed the clutch mod.
I installed this clutch mod today:
Carpenter Clutch Modification Lock Ring Suzuki GSX1300R Hayabusa (08-19)
Schnitz Racing has all the motorcycle performance parts you need to Stay in FRONT! Engine parts, swingarms, nitrous, turbo kits, chain, sprockets, air shifters, exhaust kits and much more.
store.schnitzracing.com
Used three of the heavy duty springs and three of the stock springs.
I got everything together and started up the bike.
Put it in 1st gear to take off and when releasing the clutch the bike doesn't move at all.
It's like the bike is in neutral all the time whether it's in gear or not.
I took everything apart and made sure I installed everything correctly.
In order to rule out that the problem was not the clutch mod, I put it back to stock.
No clutch mod and all 6 stock springs.
Same problem, bike doesn't move in gear when releasing the clutch.
Really need some help, it sucks that I can't even ride it now even though I removed the clutch mod.
Last edited: