ssgunny
Registered
I am posting this for a member of another board. I have been told that he has a bone stock American specs 2006 Busa. He is stationed in Japan and is undergoing emissions testing. It was tested in Japan and the CO level was a little to high (see below). During his idle test his CO level was within standard. The test was done in Tokyo and the kpa was at 99.9 which is very close to sea level.
Below are my test results/then the Japanese standard.CO: 22.23 / 20 (Fail)HC: 1.628 / 2.93 (PASS)NOx: 0.115 / 0.51 (PASS)
Do think leaning it out some via a PC or reflashing the ECU would help?
Below are my test results/then the Japanese standard.CO: 22.23 / 20 (Fail)HC: 1.628 / 2.93 (PASS)NOx: 0.115 / 0.51 (PASS)
Do think leaning it out some via a PC or reflashing the ECU would help?