Puzzled
Registered
00 Busa won't start.
Battery is good, checked in at 12.8 volts.
Power to everything.
Fuel pump energizes when the key and kill switch is turned on.
If I jump the starter relay (the battery and starter wires) the bike starts.
Nothing from the starter button when pushed.
Did have (past tense) some clicking form what looks like a relay in front of the starter relay (Same relay that is by the fuses) so I swapped relays because they were the same part number.
I changed the starter relay and still nothing when the starter buton is pushed.
Checked the starter button in the switch housing and everything is attached (don't know if power should be present or ?).
I do have the manual for my bike and followed the flow chart to no avail.
CDI box is new (just because!).
Checked the fuse, it is good as there is power present on both sides.
Where do I start looking and how do I check it?
(I cross posted this so you may see it elsewhere)
Battery is good, checked in at 12.8 volts.
Power to everything.
Fuel pump energizes when the key and kill switch is turned on.
If I jump the starter relay (the battery and starter wires) the bike starts.
Nothing from the starter button when pushed.
Did have (past tense) some clicking form what looks like a relay in front of the starter relay (Same relay that is by the fuses) so I swapped relays because they were the same part number.
I changed the starter relay and still nothing when the starter buton is pushed.
Checked the starter button in the switch housing and everything is attached (don't know if power should be present or ?).
I do have the manual for my bike and followed the flow chart to no avail.
CDI box is new (just because!).
Checked the fuse, it is good as there is power present on both sides.
Where do I start looking and how do I check it?
(I cross posted this so you may see it elsewhere)