triple tree and clip ons ?

[memphistn3000]

somebody help me out, wht are the benfits of changing the clamp and the handlebars?:dontgetit:

[BigRod1300]

somebody help me out, wht are the benfits of changing the clamp and the handlebars?:dontgetit:

Weight reduction and adjustablility...for clip ons that is a one piece tree.
Changing out just a top clamp cover....most are made with larger holes in the top to slip the fork tubes thru to lower the front.

[memphistn3000]

Thx

Weight reduction and adjustablility...for clip ons that is a one piece tree.
Changing out just a top clamp cover....most are made with larger holes in the top to slip the fork tubes thru to lower the front.

[H2447INTX]

ok

i ordered heli bars for my 09 busa nad i will put them on this weekend, if it fixes the contact between levers and dash panle i will let you all know for sure !

ok well they worked!
but you have to roll them back a bit !

with an aftermarket bar clamp or loweing clamp, you dont have the pinch bolt going threw the bars, so you can rotate them back , any how looks good feals good but the clutch still touches just a bit !

may be diff with diff clamps but works with mine !

although i may put the stock clamp back on, and raise it back up !

any how

[BigRod1300]

Ok..here are mine, but I still need to fine adjust them after the nose gets put back on. The Cycle-cat one piece tree with Driven Clip-ons.

[Dozerdriver]

Very nice looking...Big rod.