Starting and stalling problems

[Zekeyzeke1]

[ali123]

is it my speakers.... or is that baby missing a cylinder or two?

[Zekeyzeke1]

Yea one cylinder down ... had an improvement one coil had no spark swapped out still have stalling issue

[ali123]

before the pros chime in... they need a lot of info.... year/mods/service history/any other issues... tell them all u can..

[Zekeyzeke1]

Its all in my earlier post on my timing issues goin to post a new video in the am

[atlbusa]

What year is it? Fuel delivery problem!

[ali123]

just read ure earlier thread... can I ask why u replaced the head on the bike? Did this motor ever run good? have u ever heard it run on all cylinders.. if not... maybe u should look into compression tests and leakdown... start from square one... unless u know the motor isn't hurt..... see what I'm sayin here?

[Zekeyzeke1]

Turns out to be low compression across all 4 cylinders #1 90psi #2 90psi #3 110psi #4 70psi

[ali123]

Turns out to be low compression across all 4 cylinders #1 90psi #2 90psi #3 110psi #4 70psi

where are u located?

[GIXERHP]

Have the cams been out,,, Timing sounds off