Make sure you have the correct spreading (mushroom) on the riveted head. You dont want to crush the rivet head by compressing it too much causing a fissure (crack) or to little pressure where the link will come apart while in motion.
(Rhythm @ Nov. 24 2006,16:48) Make sure you have the correct spreading (mushroom) on the riveted head. You dont want to crush the rivet head by compressing it too much causing a fissure (crack) or to little pressure where the link will come apart while in motion.
Just make sure the rivet head is grinded (using a dremel or grinder)down flush and you shouldn't have any problem pushing the pin through using the kit.
Seriously, me and BBBUSA used his table top grinder because his dremel took a nose dive. With the rear tire removed place the grinder in between the swingarm up againts the master link rivet and grind that sucka down in less than 2 seconds.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.