How fast did I go?

[RCWells]

Headed home the other day, had a good head of steam, hit 6th gear, wot and held until it bumped the rev limiter 2-3 times, let off. Stock gearing, stock bike, aside from full Yoshimura R77 4-2-1 (carbon can -approx 35lb weight savings), and PCV mapped for yoshi.

Any idea how fast I was going?

Thanks

 

[JGGUNS]

Too fast to fall off. I would guess mid to high 180's.

 

[lankeeyankee]

I dont know Pull out your phone and look at the top speed on your GPS app and tell us, mine was 188

 

[card16969]

shhhhh the fuzz might be listening in ..... lol

 

[BusaBret]

I dont know Pull out your phone and look at the top speed on your GPS app and tell us, mine was 188

How fast did you stop

From my dunce stool :cookoo:

 

[GsxrBots]

Gen 1 or Gen 2?

If Gen 1 you were going about 177.4 mph.
If Gen 2 you were going about 184.3 mph..
If you were on a ZX14, check your airbox for oil..

 

[Gregor6]

Gen 1 or Gen 2?

If Gen 1 you were going about 177.4 mph.
If Gen 2 you were going about 184.3 mph..
If you were on a ZX14, check your airbox for oil..

If its a black bike add mach 3.. ...and oil if its a 14..

 

[BusaBret]

If its a black bike add mach 3.. ...and oil if its a 14..

What about a white Busa???


From my dunce stool :cookoo:

 

[lankeeyankee]

How fast did you stop

From my dunce stool :cookoo:

Ohh no dont tell me you joined the Tuf Gang here

 

[BusaBret]

Ohh no dont tell me you joined the Tuf Gang here

Absolutely not!! Just giving you a prod

From my dunce stool :cookoo:

 

[Gregor6]

What about a white Busa???

From my dunce stool :cookoo:

Bots listed the correct moped times..

 

[BusaBret]

Bots listed the correct moped times..

From my dunce stool :cookoo:

 

[Jd1300r]

Gen 1 or Gen 2?

If Gen 1 you were going about 177.4 mph.
If Gen 2 you were going about 184.3 mph..
If you were on a ZX14, check your airbox for oil..

ZX14

 

[Freechance]

ZX14

I know to never speed on a zx14
Because the cops will follow the
oil trail...

sent from my busa

 

[RCWells]

Is there that much speedo error? I thought stock they were posting runs of 185-187. Kinda figured with weight savings and mods a bit faster. Hmm. I may try to add GPS app to phone then, do another run and see if it works.

thanks

 

[JGGUNS]

If you don't remove the top speed restriction from the ECU, 188 is all it is going to do.

 

[Kildore]

Give Frank from PowerHouse a call. ECUEditor flash for $60. No more restrictions.

 

[JGGUNS]

Or buy the interface from boostbysmith.com - Home and remove it yourself. You could also get the data logging system from Greg and be able to runt the auto tune function since I know you don't have a dyno close to you.