Hid install

[AZIROC]

ok, i got my HID kit installed last wed. it looks great.! but where did you all who have dont this install put that big silver box?? for now i just zip-tied it to the right side fairing stay cause i couldnt find anywhere flat enough touse the double side tape or let alone where i wanted to drill 2 holes to bolt it down. as fas as that small relay, i just used the right side(inside) blinker screw to secure that.

 

[nitrousjunkie]

I have mine mounted inside the front fairing.

 

[MN72Busa]

I mounted my ballast on the ram-air tube. I just used a few zip ties, and have no problems with heat, or movement. Hope this helps

 

[BiG-T]

.

 

[AZIROC]

.

wow.. the double sided tape is that strong where u dont need 2 zip tie it down?!? ill prob try the ram air tube though.

 

[BigBSBusa]

.

wow.. the double sided tape is that strong where u dont need 2 zip tie it down?!?   ill prob try the ram air tube though.

It is that strong, but I added zip-ties just to be safe.

 

[heavybusa]

Nice write up

 

[ksana]

.

wow.. the double sided tape is that strong where u dont need 2 zip tie it down?!?   ill prob try the ram air tube though.

It is that strong, but I added zip-ties just to be safe.

what did you zip-tie it to?

 

[ranman]

high temp silcone and ss screws to the top of the ram air tube on the right siting on the dike.

 

[BiG-T]

high temp silcone and ss screws to the top of the ram air tube on the right siting on the dike.

*tossing ranman a letter "b"*

 

[ranman]

high temp silcone and ss screws to the top of the ram air tube on the right siting on the dike.

 *tossing ranman a letter "b"*

dang i did not see that. i hope this dont start any trouble. my bad, but kinda funny