Hayabusa 04 Don't Start, Helpp!!

[brio20t]

I have a problem with my motorcycle. It is a Hayabusa 2004. It is that when I change the coolant and the oil with filter I put the key on and when I gave the switch to start it dropped the voltage and the dash went out and there was no power again. The battery has full voltage but the fuses don't, I check the red switch (on and off to the current) and it works correctly, it has continuity. Now the question is; What happen with the motorcycle that does not have voltage to start?

Thanks for all the help that you people can give to me on this!!!

 

[sixpack577]

Retrace your steps and make sure all electrical connections are together properly.
If it ran fine before, that would be the best place to start.

 

[brio20t]

Doble check all the plugs and nothing, any other idea. And thx for the help

 

[GIXERHP]

Check your main fuse at the starter relay, it a 30 amp fuse mounted back under the tailsection.

 

[David Offor]

Not in gear is it? Doing those things won't stop it running.
Side stand switch, tip over switch malfunction?

 

[brio20t]

Check your main fuse at the starter relay, it a 30 amp fuse mounted back under the tailsection.

Straight to the point, that was all. Thanks

 

[GIXERHP]

Glad to help

 

[EchoBase]

BOOM GIXERHP
Nicely done.