Handlebar Risers

[Rocky Mtn. Busa]

I'm new to this board and recently bought an 06 Busa Limited Edtion. It's my first bike of this type after many years of riding cruisers. So far I love the beast but would like to raise the handlebars 1 1/4" to 1 3/4". Are risers available? Brands being used?

[gat0r]

lots available, prolly easier to use search button - upper right
there are lots of posts about these & spacers, etc

[Bryan0129]

Look for Heli bars... They raise it up about that and a bit forward. A bit of $ though...

[Busa Dreamin]

Genmar makes a 1 1/4" riser that looks nice also.
On the left go to Suzuki Hayabusa

Link

[Busa Dreamin]

You can also add a Tobin seat, it's a inch or so lower then stock.

[thepushercg]

i run both the heli bars and genmar riser, go with the heli bars, they are the better of the two.

[JQBusa]

Do you need to do longer brake and clutch lines to run both bars and spacer?

[thepushercg]

i have the braided cable brake and clutch lines with the genmar and heli bars. you should get them about an inch or two longer. i have put the front up on a stand fully extended i still have about two inchs of play . so i am not worried about ripping the lines when she decides to reach for the stars...

[CUL8TER]

Try reaper risers about $30 for 1 1/4 inch.

[qarnaj]

$15-18 for the do-it-yourself stack of washers & longer bolts from your local hardware store.

[ks-waterbug]

The short list...
Gen-mar
Heli bars
Cycle-Cat
Reaper Risers
Do-it-yourself

[atticdog]

I have the 2" risers that Busa Bill makes and sells

[StreetnTrack]

If you need longer lines or risers let me know.

[JQBusa]

(StreetnTrack @ Sep. 20 2006,16:34) If you need longer lines or risers let me know.

I have the 3/4 inch Genmar alreay may like to go with the Helibar or BusaBill type risers and lines, PM me some prices if you have these items please.

[StuckInBaghdad]

When you install the risers they also lower the front of the bike correct?

[Busa Bill]

2" riser you will not need to replace any line or cables you will have to re route you high idle cable ,I think heli bars run about $175 I think and reaper risers run around $30 ,Cycle cat risers run $300-400 some where around there Genmar risers are around $150 and mine are $150 TYD 2" or 3.25" . You will have to chage lines with the "3.25 risers , There are choices pick what suits you and how much you want to spend .

Peace

[Busa Bill]

Not sure with the reaper risers or cycle cats , but Genmar risers your able to if wanted , and BusaBills risers you cant .Heli risers ...no also