from turbo to stock motor ?

[hotreef]

If I was to remove my turbo and run motor. My question is with the motor modes done like top end, space plate, cams, sprockets and pistons (everything but rods was done). Will I have less power then if it was stock do to the lower compression from the space plate and pistons?
Posted via Mobile Device

 

[Rick D]

Yes it will have less power. I hear that it is like 10 horse power loss. If I was to go back stock I would pull the spacer and put the stock pistons back. You will like that better. If you are interested in selling those pistons and spacer give me a p.m.

 

[megawatt]

Yup less power but still a bullet proof engine, and now you can go back to running 87 octane fuel.