Okay.....I'm not sure if I should be disappointed or happy. This was the first time my Velocity stage one/gen one busa has ever seen a drag strip (Great Lakes Dragway, Union Grove Wisconsin Saturday Aug 21st). I know that with practice the times will improve so I'll just roll with it at this point. Had a lot of problems launching....the rear wheel kept wanting to break loose even after the bike was moving. It was 88 degrees with 92% humidity YUCK !!
-02 Hayabusa 13k miles, stock engine internals with a bolt on stage one turbo kit by Velocity (6lbs of boost, 240 h.p. tuned by Elton Fish @ EFR racing)
-6 inch stretched swingarm, bike is lowered 1.25 inches in the front, about 2 inches in the rear
-19/43 sprockets, also has the Brocks clutch mod
-175 lb rider
really......nothing else, no air shifter, no water injection or intercooler, It's just a basic busa
Ran a best of 9.40 @ 150mph in the 1/4......most passes were 9.6-9.7 sec, 60 foot times were 1.7-2.0 sec
I'm going to buy a softer rear tire and give it another try in a month or so......
-Dan
-02 Hayabusa 13k miles, stock engine internals with a bolt on stage one turbo kit by Velocity (6lbs of boost, 240 h.p. tuned by Elton Fish @ EFR racing)
-6 inch stretched swingarm, bike is lowered 1.25 inches in the front, about 2 inches in the rear
-19/43 sprockets, also has the Brocks clutch mod
-175 lb rider
really......nothing else, no air shifter, no water injection or intercooler, It's just a basic busa
Ran a best of 9.40 @ 150mph in the 1/4......most passes were 9.6-9.7 sec, 60 foot times were 1.7-2.0 sec
I'm going to buy a softer rear tire and give it another try in a month or so......
-Dan