Brembo rcs and braided lines

[Jakegsxr11]

I want to upgrade to stainless braided lines and a brembo rcs 19 master cylinder. I understand the lines will either need to be longer or have a different angle on the master cylinder fitting. Can someone specifically let me know what needs to be different on the lines so I can order them correctly?

 

[Dai.]

I believe the banjo is the only difference. My GP Billet M/C needed the banjos rotated to work.

 

[shade]

I just did this on my gen3.
I bought the lines from coremoto and didnt need to change anything. Everything fit and worked fine.

 

[SSGT_B]

If you order lines with the normal banjo the get them +2 longer, otherwise you can also get an adapter that HEL makes. It’s a pita trying to get the adapter but I have a new one if you go that route.

 

[sixpack577]

Contact Core-Moto as said above.
Their banjos rotate, so alignment and routing of the lines is easy.
They also know what banjos fit what master cylinders and calipers.
Their parts and service are excellent.

 

[Jakegsxr11]

Contact Core-Moto as said above.
Their banjos rotate, so alignment and routing of the lines is easy.
They also know what banjos fit what master cylinders and calipers.
Their parts and service are excellent.

Ok, thanks. I did contact them yesterday I guess I was just expecting poor customer service since that seems to be industry standard as of recently. I'll wait for their reply.