big bore/cams/N20/questions

frisbee

GODSPEED RACING
Donating Member
Joined
Mar 19, 2002
Messages
15,645
Reaction score
106
All done - runs great!

196 on motor - 225 on spray
bowdown.gif
NICE !!!!!

johnnycrash

Donating Member
Joined
Aug 29, 2006
Messages
964
Reaction score
3
Lots of cyl. pressure now,are you using pump gas ?
That's what we ran on the dyno (93 pump) and it didn't explode - but I still haven't sprayed it on the street. Plan was to run a 2.5 lber through it next weekend and then see how the plugs look.

Ideas? Concerns? Check your pm's.

johnnycrash

Donating Member
Joined
Aug 29, 2006
Messages
964
Reaction score
3
All done - runs great!

196 on motor - 225 on spray
bowdown.gif
NICE !!!!!
Thanks, frisbee. Our bikes made almost identical power before I did this build. After maybe 300 miles on this motor, I can tell you it is so nice to not have to hit the button all the time - you should consider doing something similar.

So far I haven't seen a downside except for noticeably worse gas mileage and the starter sounds like it has a hard time when the bike is hot.
Back
Top