Jonathan Burton
Registered
I've finally given up before I break something in fustration. Bike was running fine a couple of days ago. Now it fires and rumbles but wont start. I tried the usual trouble shoots, battery was fine even tried with jumper cables. I replaced spark plugs with new ones. Now Im cleaning the fuel pump.
Previous owner said he had a power commander installed but after stripping everything down he either had it removed or hid it in the devils arse because I cant find it anywhere. Ive read that they can cause engine malfunctions so I thought Id throw that out there.
The bike started fine until after I changed the clutch and break levers. I also switched gas from 91 to 87 after reading 87 is better for 1st gen busas. After these two changes I checked the bike and it started. Now, 2 days later, it does not. Hope this is enough info to get the ball rolling. Any and all help is greatly, GREATLY appreciated.
Previous owner said he had a power commander installed but after stripping everything down he either had it removed or hid it in the devils arse because I cant find it anywhere. Ive read that they can cause engine malfunctions so I thought Id throw that out there.
The bike started fine until after I changed the clutch and break levers. I also switched gas from 91 to 87 after reading 87 is better for 1st gen busas. After these two changes I checked the bike and it started. Now, 2 days later, it does not. Hope this is enough info to get the ball rolling. Any and all help is greatly, GREATLY appreciated.
