06 Busa fender eliminator help

[jbusa80]

I just purchased this bike and need that awful huge mudflap gone. I was looking on ebay and a fender eliminator seems to simply be a bracket for your license plate to go on. So is that all an eliminator is? There is no under piece of plastic it comes with it or do you have to do cutting to the mudflap in anyway or do you simply remove it and put on the bracket?

Thanks for any help. lease:

[kromdom]

welcome. do a quick a SEARCH, been discussed a lot. here's a recent one (no new parts needed): https://www.hayabusa.org/forum/gen-...y-fender-eliminator-you-have-one-already.html

check this one out too: https://www.hayabusa.org/forum/gen-ii-busa-information/145394-fender-eliminator-kits.html

[dk55belair]

I have a spare tag bracket that mounts down near the axle, my fender is just cut

[jbusa80]

I cut the mudflap, got a plate bracket, and an integrated light.

[V-Max 2 Busa]

You can go with an aftermarket "undertail" as seen in this thread.

https://www.hayabusa.org/forum/pashnitbusa-com/147112-yani-shinki-undertail.html

Or you can cut the shovel off the factory undertail as I have done to my 05, pics in this thread.

https://www.hayabusa.org/forum/general-bike-related-topics/65672-goodbye-ugly-shovel.html

[nickxxxr]

Im going with a yana shiki undertail. Best looking undertail made for gen one imho. Minus a motorhead of course which utilizes the stock tail light but still has the smooth lines of the undertail underneath. But they are not made anymore as far as i know. Good luck.



Sent from mobile device

[jbusa80]

I just cut it off. Didn't use the precision you did tho. I grabbed my die grinder and went to town, then cleaned it up with a file. Wish I would seen your method. I would have done something similiar to that. It came out okay but the die grinder did get away once but its in a less noticeable area I suppose. I just got the bike this year and have spent enough money getting stuff for it, didn't wanna spend on the undertail.