Yes. Motorfix from Dubai has them. In colored carbon as well. I believe it was around 450Anybody have a carbon seat that they’re using for the Gen 3? I’m looking for one. Are the gen 2’s cross compatible?
No it's a carbon seat pan, no padding and an even lower riding position than a stock seat with the foam removedCF seat? Is this a hard CF shell over padding?
I’m looking for the pan by itself, padding isn’t a big deal to meCF seat? Is this a hard CF shell over padding?
Hey ss4luck, when you took your rear brake off is there anything specific that I should know about that makes it more complicated? I’ve heard that the front and rear are essentially tied together on the gen 3, and am wondering if it throws codes when you take it off the Abs systemNo it's a carbon seat pan, no padding and an even lower riding position than a stock seat with the foam removed
They're linked in the ABS block, but it doesn't throw throw any codes if you remove them. You need to turn Hill control off before you remove it or it throws the hill! Notification along the top of your display.Hey ss4luck, when you took your rear brake off is there anything specific that I should know about that makes it more complicated? I’ve heard that the front and rear are essentially tied together on the gen 3, and am wondering if it throws codes when you take it off the Abs system
Thank you for the info!They're linked in the ABS block, but it doesn't throw throw any codes if you remove them. You need to turn Hill control off before you remove it or it throws the hill! Notification along the top of your display.
You need a rear brake delete spacer that still holds your rear wheel speed sensor or it'll make your bike basically go into limp mode. Alif Performance is the only company I know that makes one.
No problem. Shoot me a message if you have any other questionsThank you for the info!