windscreen removal

[argyle66]

The plastic push ins to remove the inner wrap around dash

whats an easy way to take out the little push ins.. without knarling it up and prying with a screwdriver

its probably really easy , but these are new to me

just replacing OEM with DB windscreen

 

[tjdobb]

Push the center of the pushpin in with a small screw driver. you will feel it click as you push this in and then the pushpin will release and you will be able to pull the plastic pin out with ease.

 

[razorshark]

my DB should be here tomorrow and I already removed the windscreen to get ready for it. Its simple to remove the plastic pins, push center in and they pop out. good luck and post pics!

 

[argyle66]

holy crap I knew it was something easy... damn ... I would have ratched it all up... thank you for the help !!!

 

[dadofthree]

pics of install..........................

 

[heavybusa]

(dadofthree @ Jun. 11 2007,01:29) pics of install..........................

 

[06BUSA]

Y are you pulling anything other then the 2 hex bolts just behind the mirrors?
They are the only 2 holding the screen in place.

 

[rubber2burn]

(06BUSA @ Jun. 11 2007,06:28) Y are you pulling anything other then the 2 hex bolts just behind the mirrors?
They are the only 2 holding the screen in place.

+1 yep what he said

 

[argyle66]

wanted to see what was behind before yanking on the runbber pin... its all squared away and yes can easily be done by pulling just the two pins