I'm trying to install my undertail (UT); before I do that I want to get the job done right. I got the turn signals down and do not need help with that. Below it the picture of the wiring of both the undertail (UT) and busa harness (H). This is what I have tried:
I have connected the WHITE UT with the BROWN H; and the BROWN UT with the BLACK w/ WHITE stripe and this configuration worked the constant rear lights.
When ever I encorporate the RED UT with either WHITE w/ BLACK stripe H and test the front brake or rear brake then the constant rear lights turns off.
Any assistance would be greatly appreciated.
I have connected the WHITE UT with the BROWN H; and the BROWN UT with the BLACK w/ WHITE stripe and this configuration worked the constant rear lights.
When ever I encorporate the RED UT with either WHITE w/ BLACK stripe H and test the front brake or rear brake then the constant rear lights turns off.
Any assistance would be greatly appreciated.