Undertail for lowered bike

[MR MIYAGI]

I HAVE A K4 BUSA LOWERED 3 INCHES IN THE REAR AND THE
REAR TIRE RUBS THE INSIDE OF THE CHEAP ($100) UNDERTAIL
I BOUGHT FROM EBAY...I'M WONDERING WHAT UNDERTAIL IS
WIDE ENOUGH TO WORK FOR ME.  THE TIRE RUBS ON THE
SIDEWALL AT THE BELT LINE...I'M SURE OTHER RACERS HAVE
HAD THIS SAME PROB.  WHAT DO YA'LL THINK?
                                                    MM

 

[Over_Easy]

Wish I had the answer...isn't 3" more than average?

 

[Warputer]

Heard the Motorhead undertail is real popular with the extreme lowered Busas !

 

[goodluck]

motorhead is the only one i have read about that will work with it lowered that much here is a link to his

http://www.hayabusaparts.com/catalog....2{11}18

 

[BigBSBusa]

motorhead is the only one i have read about that will work with it lowered that much here is a link to his

http://www.hayabusaparts.com/catalog....2{11}18

+1. Great undertail that completely replaces the rear fender and allows you as much drop as you would ever want.

 

[heavybusa]

that looks great!

If you are that low you should focus on the pipes, plastic, and oil plug. Those are all very close to the ground at 3"s for regular riding.

But for me a dremel tool works the best.

I had to extend my turn signals out a few inches and then I used a polished plate and got creative. If Virginia didnt suck I could move my plate and be way better off

Someone told me you can buy this somewhere but I havent found it.

good luck!



<!--EDIT|heavybusa
Reason for Edit: "sleeping at the keyboard"|1153778787 -->