Twotoneverts Hauler

[twotonevert]

I just figured that since we had a section dedicated to haulers, I would post up mine so anyone that needed ideas or would like to give suggestions would have an opportunity without having to search throught a bunch of threads. So, here it is. It is a 6x12 single axle, ramp door, side door, not a lot of frills.

 

[twotonevert]

...

 

[twotonevert]

The first thing I did was paint the floor with non-skid paint, in the fastest color of course. There is sand in the paint and it really grips the tires.

 

[twotonevert]

Next were white walls.

 

[twotonevert]

Mounted the chocks, measure twice and drill once.

 

[twotonevert]

...

 

[twotonevert]

Installed mounts for the stand and compressor.

 

[twotonevert]

Installed a cross bar that would not give up under the weight of the leather that will be hanging on them.

 

[twotonevert]

Trash can tie down.

 

[twotonevert]

...

 

[edubb1971]

 

[twotonevert]

A few necessities, such as honda polish, hand cleaner, wd-40, micro-fiber towels, etc.

 

[Rayabusa0818]

The first thing I did was paint the floor with non-skid paint, in the fastest color of course. There is sand in the paint and it really grips the tires.

Tell me about the paint...where did you get etc?

 

[GSXcite]

Looks good James. Do you have a closer shot of how you secure the compressor?

 

[goodluck]

looks good

 

[pbghost]

very nice!

 

[99'busa]

u got me excited about one

 

[semi]

looks good bro...can't wait to see it in person

 

[twotonevert]

The first thing I did was paint the floor with non-skid paint, in the fastest color of course. There is sand in the paint and it really grips the tires.

Tell me about the paint...where did you get etc?

Don, you can get that at lowe's for 25 bux a gallon. Skid Not, ask for it by name. There are like 75 colors to choose from.

 

[twotonevert]

Looks good James. Do you have a closer shot of how you secure the compressor?

I can take a pic tomorrow for you. It is basically a recessed thread. I got them at Lowes for 1.29 each, you drill a 1/2 inch hole, thread hollow plug into the floor till flush. It accepts the 3/8" allen bolts that thread into it. I used two to hold the compressor and 1 to hold the stand. I will get you a better pic.