Stock wheel base / arm 1/4 mile times

[Boostednutbusa]

Your problem in the 1/4 will be the short wheelbase, and rider skill will play a huge factor. It could go 8.0's at 170 mph or 10.0's at 160. I went 155 in the 1/8 on this supercharged Busa with a very mild tune. Wheelbase is king!

View attachment 1700434

I have gone 9.0 on my first gen Turbo bike at 174. The boost per gear was not set up at that point. So it would have been 8’s easy.

Chris Moore has run a stock wheelbase record at 8.07 at 185 so this guy is not gonna be running 8.0

My guess is a mid eight if your boost per gear is set up right..

I haven’t raced my bike in a couple of years because I’m adding stuff to it.

My Nitrous bike second gen is getting faster so far. Hitting the Nitrous probably this weekend.

Both are stock wheel base /arms

 

[Dennis]

I have gone 9.0 on my first gen Turbo bike at 174. The boost per gear was not set up at that point. So it would have been 8’s easy.

Chris Moore has run a stock wheelbase record at 8.07 at 185 so this guy is not gonna be running 8.0

My guess is a mid eight if your boost per gear is set up right..

I haven’t raced my bike in a couple of years because I’m adding stuff to it.

My Nitrous bike second gen is getting faster so far. Hitting the Nitrous probably this weekend.

Both are stock wheel base /arms

That's exactly my point. It's very rider dependent with SWB. We don't know his personal skill level.

 

[Rojo]

Thread 'Whats your 60''

May 6, 2019

Stock motor. Hand clutch.
68" wheelbase. Consistent low 1.5's 225lb suited.
17t front 43t rear. 16t on the way to see what happens. Looking to see what times everybody has. Gearing and rider weight. 40lb good for 2tenths? I have it in my head I can get this fat boy near mid 1.4's

• Bigboy Busa2
• Replies: 43
• Forum: 1/4 Mile

This show had a cult like following & APE 60” class was the premiere Dragbike class to watch in the 21st century *