Well here goes. Finally got the pics together for the install write up. There are many options but I tried for the best for me. You will have to remove the tail section. Used included "Y" connector for hayabusa to connect main harness from alarm to bike wiring w/factory style connectors. VERY VERY EASY part. That supplies nearly all power.
Location of unit/devices: I decided to locate the main unit on the left side of the tail section in front of the voltage rectifier for several reasons. Right side of bike is usually closest to curb so left side is more opt to be heard. Right side has many uses such as compressors, air shifter bottles, left has none. Left side is right at opening in tail section so it's even louder. Relay for starter interrupt is on left side. Pos of battery is on left side.
1st pic is of main unit mounted. Supplied velcro and zip ties used for piece of mind. Used wire loom on all wires to keep vibration cuts down. Looks better.
<!--EDIT|ICEMANN
Reason for Edit: None given...|1082685333 -->
Location of unit/devices: I decided to locate the main unit on the left side of the tail section in front of the voltage rectifier for several reasons. Right side of bike is usually closest to curb so left side is more opt to be heard. Right side has many uses such as compressors, air shifter bottles, left has none. Left side is right at opening in tail section so it's even louder. Relay for starter interrupt is on left side. Pos of battery is on left side.
1st pic is of main unit mounted. Supplied velcro and zip ties used for piece of mind. Used wire loom on all wires to keep vibration cuts down. Looks better.
<!--EDIT|ICEMANN
Reason for Edit: None given...|1082685333 -->