I just go a pc3r from Johnnycheese and, he wants me to set my "TPS" before I get going.
I went into my Suzuki service manual and, it refers to a "dealer mode coupler" tool # 09930-11960:torx wrench!!
Well, needless to say, I don't own nor, have access to any such tool.
I looked and, my display (LCD) doesn't seem to be showing anything out of the ordinary and, I was curious if there's some way you folks have figured to reset and or check the "TPS" without having to use one of those dealer coupler tools.
It mentions in the service manual a "user mode" and a "dealer mode" and, I guess I need to know how to figure out get to this "user mode" area and, then, how to read my LCD display before I start loosening screws and moving things around.
This (i'm willing to bet) is probably easy for most here but, I'm being very careful cause, I'm not that fimliar with FI & computers ect..
Any input out of experiance would be very helpful, Thanks in advance
I went into my Suzuki service manual and, it refers to a "dealer mode coupler" tool # 09930-11960:torx wrench!!
Well, needless to say, I don't own nor, have access to any such tool.
I looked and, my display (LCD) doesn't seem to be showing anything out of the ordinary and, I was curious if there's some way you folks have figured to reset and or check the "TPS" without having to use one of those dealer coupler tools.
It mentions in the service manual a "user mode" and a "dealer mode" and, I guess I need to know how to figure out get to this "user mode" area and, then, how to read my LCD display before I start loosening screws and moving things around.
This (i'm willing to bet) is probably easy for most here but, I'm being very careful cause, I'm not that fimliar with FI & computers ect..
Any input out of experiance would be very helpful, Thanks in advance