raise lowered 08 busa
- Thread starter tico1340
- Start date
If you have a lowering link just use the stock hole that will race your bike to stock
Look at your lowering links underneath.
If they have 3 holes you just need to place the bolt through the correct hole to raise it up, The shorter the link the higher the bike will be.
If there adjustable links same thing, just adjust them shorter and it will raise the rear.
If they have 3 holes you just need to place the bolt through the correct hole to raise it up, The shorter the link the higher the bike will be.
If there adjustable links same thing, just adjust them shorter and it will raise the rear.
Shouldnt have to, They may have stiffened the pre load a little to adjust for the lowering, raise it up and see how it feels, if its a stiff ride you may have to adjust the pre load on the shock.
I know there is a nut that adjusts with a spanner wrench ( some people use a flat head screwdriver and a hammer )
I know there is a nut that adjusts with a spanner wrench ( some people use a flat head screwdriver and a hammer )
Similar threads
