I scored a set of used adjustable Soupy's rear lowering links on ebay. Look like new but I can't adjust them to fully collapsed. I think they need to be fully screwed together for stock height, which I will want at times. On both, the left hand ends will not fully screw in. They get VERY tight with about 5/8" threads left. No sign of former loctite, but on one side the left hand threads have a flat spot for a ways (looks like it was built that way, not shiny but anodized even on flat portion). Right hand threads are great.
Questions:
1. Am I correct that fully collapsed is stock height? Should be about 4 11/16" fully compressed?
2. They should screw together fully, correct? Something is wrong with mine?
3. If I want to lower the rear 1", do I extend them about 1/4" from fully collapsed?
Thanks!
Questions:
1. Am I correct that fully collapsed is stock height? Should be about 4 11/16" fully compressed?
2. They should screw together fully, correct? Something is wrong with mine?
3. If I want to lower the rear 1", do I extend them about 1/4" from fully collapsed?
Thanks!