Pc5 maps

[mjizzle454]

Ok I added a pc5 on to the busa now it doesn’t start it’s been sitting up for six months
Which it ran before
I changed the oil an the plugs an when the Pc5 is not hooked up it still does not start any suggestions

 

[202mphbusa]

What year bike?
Fuel pump cycling?

 

[Nastee]

Ok I added a pc5 on to the busa now it doesn’t start it’s been sitting up for six months
Which it ran before
I changed the oil an the plugs an when the Pc5 is not hooked up it still does not start any suggestions

Did you check that battery is fully charged & coil(spark plug) boots are pushed all the way on?

 

[Dennis]

Is the FI light on?

 

[mjizzle454]

Is the FI light on?

 

[mjizzle454]

What year bike? Fuel pump cycling?

 

[mjizzle454]

What year bike? Fuel pump cycling?

 

[mjizzle454]

What year bike? Fuel pump cycling?

 

[mjizzle454]

What year bike?
Fuel pump cycling?

yes the fuel pump cycle an it’s a 06

 

[mjizzle454]

Did you check that battery is fully charged & coil(spark plug) boots are pushed all the way on?

Yes checked the battery an the coils (1.4 an 13.67)

 

[mjizzle454]

Yes the f1 light is in which it was on when I bought it because fuel hand is not working

 

[202mphbusa]

Check the FI light code
Jump the dealer plug and read the code

 

[Mythos]

Call DJ. Most of these threads I have read were solved by with a phone call or two.

If you get DJ people on the phone who can't solve this immediately, ask for Chris Kelly.

 

[mjizzle454]

Thanks

 

[mjizzle454]

Check the FI light code
Jump the dealer plug and read the code

Ok thanks

 

[mjizzle454]

Thanks

Is he in here

 

[Hayabusa Wannabe]

@Mythos he said the bike does not start when the PC is disconnected. Gotta start from scratch, forgetting the PC.

 

[mjizzle454]

Ok thanks

Check the codes only c92 my fuel hand do not work

 

[BigBSBusa]

C92 is the fuel level signal (sending unit).

 

[mjizzle454]

Yea my fuel hand do not work