Mason357
Registered
I have a 2010 ninja 250 that won't get spark. I can touch a battery to the coil terminals and get spark but, with the wiring connectors on the bike I connect a volt meter to the plug lead and ground it reads 12v I dont think it should read when it's not cranking. The crank sensor was good when I tested it. Don't know how to check the coil,wires to coil, ic ignitor etc. Any advice would help alot.
Ps. When I got it together it started a few weeks ago no gas but,used starting fluid.
Ps. When I got it together it started a few weeks ago no gas but,used starting fluid.