New Honda CB1100
- Thread starter Twobrothersbusa
- Start date
- Joined
- Feb 18, 2009
- Messages
- 7,078
- Reaction score
- 65
- Joined
- Jun 8, 2009
- Messages
- 23,096
- Reaction score
- 34,808
That page is showing that at least it has preload adjustment on front and rear suspension.
Better than nothing, which is what I've seen previously.
Should handle a little better than expected.
squale147
Registered
- Joined
- Jan 23, 2011
- Messages
- 1,284
- Reaction score
- 29
If I had the money, I'd have one.
samw here...love it
- Joined
- Mar 14, 2005
- Messages
- 4,685
- Reaction score
- 285
for $10 grand plus TT&T to get my azz handed to me even at the dyno by every 600cc sportbike currently made?..and by a large margin?..i'll admire looking at someone elses who's in a race to the bottom. LOL!
and as far as playing the "yeah..but it has old school class" card?...(which i'll admit it does)..i bet most of the components that make up that bike came out of their overstock warehouses..and why lord oh why would anyone drop that kinda dough these days on such a dog when a decade ago Kawi had a simular re-release of the Eddie Lawson Race Replica...which i immediately bought..my ZRX1100R...
they ran about $6,999 and came with a radiator and?..made close to 100rwhp and 70ftlbs bone stock..if i recall properly?..w/ a full muzzy meg, K&N Pods and a dynojet kit i was getting around 112rwhp and gobs of torque...two teeth up on the rear sprocket?..and just whack the throttle anywhere above 3K rpm in 1st and the front wheel was airborn..until i totaled it into the side of a minivan two years later at 45mph..i was maybe 20yds away when i realized the 70+ years old man behind the wheel was looking right through me and darted out in front of me making a left...slam!..came to with a crazed old women screaming "Get Up! GET UP!" and trying to jerk me up to my feet..with me screaming explitives back at her..until the female nurse in the car behind me told her.."Mamm!..I'm an Regisered Nurse and i'm going to hafta ask you to step back from that man!"....then she leaned over me and told me..
"You just relax...paramedics are on their way and i saw the whole thing..it wasn't your fault."
and i loved hearing that last part but man did that blow. LOL!
and as far as playing the "yeah..but it has old school class" card?...(which i'll admit it does)..i bet most of the components that make up that bike came out of their overstock warehouses..and why lord oh why would anyone drop that kinda dough these days on such a dog when a decade ago Kawi had a simular re-release of the Eddie Lawson Race Replica...which i immediately bought..my ZRX1100R...
they ran about $6,999 and came with a radiator and?..made close to 100rwhp and 70ftlbs bone stock..if i recall properly?..w/ a full muzzy meg, K&N Pods and a dynojet kit i was getting around 112rwhp and gobs of torque...two teeth up on the rear sprocket?..and just whack the throttle anywhere above 3K rpm in 1st and the front wheel was airborn..until i totaled it into the side of a minivan two years later at 45mph..i was maybe 20yds away when i realized the 70+ years old man behind the wheel was looking right through me and darted out in front of me making a left...slam!..came to with a crazed old women screaming "Get Up! GET UP!" and trying to jerk me up to my feet..with me screaming explitives back at her..until the female nurse in the car behind me told her.."Mamm!..I'm an Regisered Nurse and i'm going to hafta ask you to step back from that man!"....then she leaned over me and told me..
"You just relax...paramedics are on their way and i saw the whole thing..it wasn't your fault."
and i loved hearing that last part but man did that blow. LOL!
- Joined
- Oct 8, 2008
- Messages
- 4,950
- Reaction score
- 535
And I'd bet money...even with just 70hp you could get the front end off the ground!
That page is showing that at least it has preload adjustment on front and rear suspension.
Better than nothing, which is what I've seen previously.
Should handle a little better than expected.
- Joined
- Jun 8, 2009
- Messages
- 23,096
- Reaction score
- 34,808
- Joined
- Sep 6, 2006
- Messages
- 60,244
- Reaction score
- 2,854
I bought a CB750 killer in '78 ....... KZ650
- Joined
- Mar 14, 2005
- Messages
- 4,685
- Reaction score
- 285
yeah...i bet ya could..and alls ya hafta do is from a 5mph roll, rev to redline and dump the clutch...
with a fat chick on the back.! LOL!
or just do it the safe easy way...a bottle jack and a 2x4.
Just jk'in..cause actually you're right...should be a breeze to wheelie...with 1100cc's of heavy parts inside?..with that low of a HP rating?..it should at least have some serious torque...and definantly isn't built like more agressive bikes where they are by design engineered to keep the front end down under hard acceleration...engine/rider weight waaaay forward..real shallow rake...the CB has none of that. LOL!
- Joined
- Jul 7, 2005
- Messages
- 9,826
- Reaction score
- 49
I had a 900 custom as well. A 1980 blue one too.
The hi and low range with the 5 speed trans was cool. I kept mine 12 years. Our dealership already has deposits on ordered CB1100's.
- Joined
- Oct 8, 2008
- Messages
- 4,950
- Reaction score
- 535
The cool thing about this bike is that you can basically still buy them brand new. Tims restores them to showroom new.
TIMS motorcycles For Sale
TIMS motorcycles For Sale
- Joined
- Feb 18, 2009
- Messages
- 7,078
- Reaction score
- 65
I've never heard of such a business. The CBX is definitely my favorite old bike.
RedBull
Registered
- Joined
- Jul 19, 2003
- Messages
- 10,851
- Reaction score
- 14,304
for $10 grand plus TT&T to get my azz handed to me even at the dyno by every 600cc sportbike currently made?..and by a large margin?..i'll admire looking at someone elses who's in a race to the bottom. LOL!
and as far as playing the "yeah..but it has old school class" card?...(which i'll admit it does)..i bet most of the components that make up that bike came out of their overstock warehouses..and why lord oh why would anyone drop that kinda dough these days on such a dog when a decade ago Kawi had a simular re-release of the Eddie Lawson Race Replica...which i immediately bought..my ZRX1100R...
they ran about $6,999 and came with a radiator and?..made close to 100rwhp and 70ftlbs bone stock..if i recall properly?..w/ a full muzzy meg, K&N Pods and a dynojet kit i was getting around 112rwhp and gobs of torque...two teeth up on the rear sprocket?..and just whack the throttle anywhere above 3K rpm in 1st and the front wheel was airborn..until i totaled it into the side of a minivan two years later at 45mph..i was maybe 20yds away when i realized the 70+ years old man behind the wheel was looking right through me and darted out in front of me making a left...slam!..came to with a crazed old women screaming "Get Up! GET UP!" and trying to jerk me up to my feet..with me screaming explitives back at her..until the female nurse in the car behind me told her.."Mamm!..I'm an Regisered Nurse and i'm going to hafta ask you to step back from that man!"....then she leaned over me and told me..
"You just relax...paramedics are on their way and i saw the whole thing..it wasn't your fault."
and i loved hearing that last part but man did that blow. LOL!
They still build this bike with a fuel injected motor now . . .
It needs a ZX14 motor in it with all 6 gears !
Then we would have a throw back ?
Something that can go too !
Kawasaki ZRX 1441 .
Red, *<(:{)-
Similar threads
