I'm about 99.999% "Certain" that the gray wire must be the ground due to the fact that the gray wire is the only thing common to the 4 plug boots...so all other multi-color tracer wires must be "The Signal Wires" which i believe would be "POSITIVE" in nature.(Big Tuna @ Apr. 19 2007,11:27) I have been looking through the service manual on cd trying to find which of the 2 wires is the negative. Each coil "sparkplug" boot has 2 wires, 1 being gray. The other wire is a multistripe or tracer. which is the negative?
WOW!....that would be a 1st for me with regards to wiring..i thought the only common denominator to all four coild would be the gray wire...as in...they all have a gray wire..which typically would all adjoin at some point...going too the only place they could all have in common...."THE GROUND"...but the striped multi-color tracers are each different colors...making me believe they are each unique signals...NOT...all adjoining at the same place.(GoldenChild @ Apr. 19 2007,11:40) Grey is positive on all of them,the negative is the distinct color on each coil.
your wrong...at least according to the service manual...the way i read it..(GoldenChild @ Apr. 19 2007,11:40) Grey is positive on all of them,the negative is the distinct color on each coil.
Page 7-24 in the Ignition/Electrical Section.(tinbender0 @ Apr. 19 2007,11:58) and get a manual
Reading is fundemental:I install kill boxes all the time and should know.Read just under the coil diagram:(JINKSTER @ Apr. 19 2007,14:56)your wrong...at least according to the service manual...the way i read it..(GoldenChild @ Apr. 19 2007,11:40) Grey is positive on all of them,the negative is the distinct color on each coil.
#1 White/Black ='s Pos.
#2 Blue ='s Pos
#3 Yellow ='s Pos
#4 Green ='s POS
ALL OTHER GRAY WIRES ARE GROUND!
L8R Bill.
You're right...reading IS fundamental...and Daniel?... in this case?...i truely believe you'd be wise to follow my lead on this one (instead of lashing out)...as i'm sticking with what the "Suzuki Hayabusa Shop Manual" says in Section 7, Page #24...and NOT on some generic wiring diagram provided by an aftermarket electronics company(GoldenChild @ Apr. 19 2007,13:06)Reading is fundemental:I install kill boxes all the time and should know.Read just under the coil diagram:(JINKSTER @ Apr. 19 2007,14:56)your wrong...at least according to the service manual...the way i read it..(GoldenChild @ Apr. 19 2007,11:40) Grey is positive on all of them,the negative is the distinct color on each coil.
#1 White/Black ='s Pos.
#2 Blue ='s Pos
#3 Yellow ='s Pos
#4 Green ='s POS
ALL OTHER GRAY WIRES ARE GROUND!
L8R Bill.
Positives are solid grey and negatives on the coils are the distinctive colred wires.