need clutch help!!!

[jusmoov]

I took apart the cover for the front sprocket and the pin and diafram that pushes the clutch in came out. All the fluid came out so I figured " o well, it's probally just like bleeding the brakes on a car" So I filled the resavoir and tried to get the fluid to start pumping through but it won't. The most I get is a little pumping out but no pressure on the clutch lever. anyone help me with this. How do I get the clutch to start working again???

 

[justintime2]

Hope this helps!

http://www.ronayers.com/fiche/getyear.cfm?groupid=5090&man=su

 

[justintime2]

 

[fstbusa]

maybe you ruined the pumping mechanism when that pin and diamphram came out..... you could try getting a power bleeder that sucks the fluid through.

 

[ks-waterbug]

There should be a bleeder valve on the left hand side of the engine case for the clutch assy........... Not sure why all the fluid would come out when you removed the rod at or near the front sprocket! You bleed your clutch just like you would for your brakes.