Ive got an idea

[sumo]

Ok i noticed when i have my high beams on its not really shining down the road like i though it would be but instead its concentrated mainly infront of the bike. I was thinking of swapping so that my low beams would actually be the projector highs and the highs well of course would now be the low beam What do you guys think?

[ksana]

did u already try adjusting them?

[CorrodedAlien]

+++ to adjust....

Set it upon your rear stand, turn on the light (pick low or high) and tweak it up a couple of inches. I used a tall box placed about 4' from the front of the bike. Mark the start spot and go for it. I now have people flippinng their mirrors in the day time...

[sumo]

well havnt tried that yet. My busa is still new out of the crate at 202 miles

[Lamb busa]

The front light must be adjusted> I had to do it on mine first thing!

[CorrodedAlien]

until you do adjust... go home before dark...

[BusaWhipped]

until you do adjust... go home before dark...

Or keep it under 45.

[MoosesBusa]

The factory sets these bikes up to illuminate 2 feet in front of the bike. No, really. Everybody here on the .org has had the same setting you've got. Remove the trap door on the bottom of the fairing above the front fender and adjust your bulbs. You'll be surprised how low they really are. Then get yorself an HID bulb from someone here on the .org and really be amazed!

[MoosesBusa]

If you need better instructions and illustrations, Go to the maintenence and do it yourself section and download the $50 service manual for FREE. Hope you have a high speed connection 'cause its a L A R G E file

[sumo]

nice very nice! Ill do that. are you guys talking bout lows/high or both? Believe it or not i already have Hids in both low and hi beams.

[06BUSA]

My low was set very low. First night ride hit the on/off ramp and could not see around the bend.