I Think I Am Missing The Stop Light Switch??

[Jose J Ortega]

Back light works, but I press the back brake and the stop light won't go on. I think I am missing a switch here.

[GIXERHP]

You need a Hydraulic brake switch for those rear sets

[fallenarch]

You need a Hydraulic brake switch for those rear sets

How you been GIXERHP? Hope you had a good Christmas.

[twotonevert]

Am I missing something or is the actuator not connected?

[twotonevert]

Am I missing something or is the actuator not connected?

[Jose J Ortega]

You need a Hydraulic brake switch for those rear sets

Thank you GiXERHP.

[Jose J Ortega]

I am tryin to figure out where the Hydraulic brake switch need to be install at. Any one has a pic ?

[CBXRider]

It mounts inside the footpeg mount.

[Jose J Ortega]

It mounts inside the footpeg mount.

I was watching a Video in YouTube and I think that I missing this cable. My busa has a custom aftermarket Rear Set Brake pedal. Need to look around where I can find that cable at. This was already install when I got the Bike.

[ROADTOAD1340]

I was watching a Video in YouTube and I think that I missing this cable. My busa has a custom aftermarket Rear Set Brake pedal. Need to look around where I can find that cable at. This was already install when I got the Bike.

View attachment 1578630

Hi Jose , you need a hydraulic pressure switch as the lads have said , it is a threaded switch to replace / takes place of your brake line banjo bolt , at the pump end . I can't remember what thread the Busa pump thread is , but someone should chime in on this . Probably going to have to get some one to then wire it up , and maybe a Gen 1 wiring diagram to help make it easier to get it sorted bro .

[Mythos]

Here is how I did mine. One of these 90° booted switches works neatly for a busa. The pressure switch is the banjo bolt.

You'll find more info about installing here. https://www.hayabusa.org/forum/threads/genii-footrest-assy-removal-sato-rearsets-install.170972/

[GIXERHP]

FYI, Gen 1 and 2 rear brake wires are the same, 2 pin molex plug

[Jose J Ortega]

Thanks to all.. I appreciate all your great help