Hayabusa Gen 1 Engine Swap

[BlackHammer]

Next project after putting this engine in this weekend is painting a set of fairings I bought off Facebook marketplace, I'll start a thread for that and try to be as detailed as possible, step by step process with pics. I've decided on a color to go with and I think it'll look nice and unique. I still need an additional front fender and nose fairing if anyone's got the hook up!!!

[RedBull]

Definitely !

Going to get
all up in there
on Saturday !

#CustomPainting~ #HayabusaFairing ~ #YouGotThis ~ #THEoRg *

Ten Year Anniversary Paint Job | Appearance mods

I was planning to replace the plastic on the Hayabusa for our 10 year anniversary. I was think of going back to the 09 silver with a simpler look. I was thinking of a huge Kanji that is smearing like it was put on with paint and hen the wind smeared it. On the other side I was not going to...

www.hayabusa.org

[BlackHammer]

#CustomPainting~ #HayabusaFairing ~ #YouGotThis ~ #THEoRg *

Ten Year Anniversary Paint Job | Appearance mods

I was planning to replace the plastic on the Hayabusa for our 10 year anniversary. I was think of going back to the 09 silver with a simpler look. I was thinking of a huge Kanji that is smearing like it was put on with paint and hen the wind smeared it. On the other side I was not going to...

www.hayabusa.org

C'mon now, who HASN'T seen that donk yet?! hahaha I find a ton of good vids on Youtube as well

[BlackHammer]

TOMORROW IS THE DAY FELLAS!!!!!

[BlackHammer]

All done! Going to pick up some oil and coolant, then it’s fairings and time for a ride!!

[BlackHammer]

First post op ride complete! Think I need to adjust the thrust adjusters, had broken the “special tool” apparently my torque wrench lies to me.
- discovered a broken tooth on the rear sprocket.
- Need to adjust throttle free play.

On the plus side, this new motor had less mileage, pair system delete, and a lighter weight front sprocket!
Next up is a lightweight rear sprocket, a new rear tire, and a trip to powerhouse for a dyno/tune eventually.

going to start prepping the second set of fairings and tank for paint. I’ll start a new thread whenever I start that one.

[Tenderfoot]

@BlackHammer You made it look so easy! Was it as easy as it sounds? If so I may try this in the future!

[BlackHammer]

@BlackHammer You made it look so easy! Was it as easy as it sounds? If so I may try this in the future!

It’s really not too bad man, if you have a basic set of tools and a heavy duty jack you should be good to get it done, oh and of course...can’t forget your handy dandy “special tool” lmao just get yourself a service manual and get to work!

[Sparky405]

Next project after putting this engine in this weekend is painting a set of fairings I bought off Facebook marketplace, I'll start a thread for that and try to be as detailed as possible, step by step process with pics. I've decided on a color to go with and I think it'll look nice and unique. I still need an additional front fender and nose fairing if anyone's got the hook up!!!

I have both I need to look in storage

[BlackHammer]

I have both I need to look in storage

Hey Sparky! Just seeing this post now, if you found the nose and front fairing I've got some cash ready to send your way!

[Sparky405]

Hey Sparky! Just seeing this post now, if you found the nose and front fairing I've got some

Hey Sparky! Just seeing this post now, if you found the nose and front fairing I've got some cash ready to send your way!

I have the fender it's in good shape it's all in tact but the nose piece is gone

[BlackHammer]

No problem brotha that's one piece down and one to go!!! Hahaha what ya want for it?

[Sparky405]

No problem brotha that's one piece down and one to go!!! Hahaha what ya want for it?

Let me see what it costs to ship

[BlackHammer]

Let me see what it costs to ship

I'm in Rhode Island, 02919 is the zip